Note: To adjust the adjustable hair trigger mechanism, you must remove the trigger cover.
SCUF Trigger Covers
Step 1 To replace the trigger cover, use your opening tool (included) to apply pressure under the attached trigger cover and push up.
Step 2 Once the cover has unclipped from the trigger, push down on the quick shift trigger stop and remove the cover.
Step 3 To replace the trigger cover, push the trigger down on the quick shift trigger stops and snap the top part of the cover on. Tilt the cover down to snap on to the trigger.
DIRECTIONS: SCUF Adjustable Hair Trigger
Step 1 - Remove the short trigger cover or trigger extender to adjust the adjustable hair trigger mechanism.
Step 2 - Insert the 0.9mm SCUF key into the adjustable screw on the top of the adjustable hair trigger mechanism (see diagram/photo attached).
Step 3 - With trigger stops in their desired position, turn the 0.9mm SCUF key two full clockwise no more than two full rotations to tighten and activate the adjustable hair trigger.
Note: It is recommended to adjust the hair triggers in game to adjust to preference. Tighten the adjustable hair trigger in game until the trigger function engages, then loosen slightly to playing preference.
Step 4 To turn the adjustable hair trigger off, Insert the 0.9mm SCUF key into the adjustable screw on the top of the trigger mechanism and turn counterclockwise until the top of the screw is flush against the top of the trigger mechanism.
IMPORTANT NOTES ABOUT HAIR TRIGGERS:
- Adjusting the Hair Triggers will not depress the trigger physically. The Hair Trigger Adjustment will affect the tension of your trigger and how quickly it will engage in your game, not the trigger piece itself.
- The goal in adjusting your Hair Trigger is not to find your desired tension with the trigger, but rather to find your trigger's "sweet spot" where it will quickly engage your trigger's function in the game you are playing.